Omitec Wheel Pressure Sensor Tools
OmiTire & OmiDetect
The OmiTire will programme the ECU to register a new wheel valve or re-register valves if wheels have been moved into different positions. Can be used in conjunction with OmiDetect - required to activate the valves. Supplied with all necessary cables.
is a diagnostic tool for activating and checking Radio Frequency (RF) wheel
sensors as fitted to new tyre pressure monitoring systems. It will activate
a wide range of OE tyre pressure monitoring valves for testing prior
to and after tires have been fitted or for registering the valve on the
The unit can also check Remote Keyless Entry (RKE) transmitters, both at RF frequencies and infrared (IR) transmissions. The OmiDetect connects via the vehicle diagnostic socket and relays information to a clear easy to read display. Supplied in a protective pouch.
is the complete solution for tyre fitters wishing to test or replace Tyre
Pressure Monitoring System (TPMS) valves. The kit contains an
OmiDetect for activating and checking that tyre valve sensors are
working and an OmiTire for reprogramming ECU’s to accept new
valves or re-registering existing valves. The technician will find this tool
essential when working with vehicles equipped with TPMS.
OmiDetect will activate a wide range of TPMS valves for
testing prior to and after tyres have been fitted or for registering the
valve on the vehicle’s ECU. It gives results instantly and is simple to use.
OmiTire connects via the vehicle diagnostic port and will programme the ECU
to register new valves or re-register existing valves if wheels have been
moved into different positions. The OmiTire Kit is designed to allow
technicians to replace damaged or expired valves without having to send the
vehicle back to the main dealer. Simple, prompted steps allows the valves to
be checked, registered and to make the system operational.
ü OmiTire is also housed in a rugged rubber boot and draws its power direct from the vehicle. The handset is lightweight and easy to use.
ü The kit is supplied with a J1962 Universal Multi-way harness, providing access to different vehicles' ECU’s, and an extension cable so that one man operation is achieved when used in conjunction with the OmiDetect.
ü The kit is supplied with comprehensive instructions that include manual procedures for systems that do not require a tool.
ü TPMS valve sensors (direct systems) activation test for Schrader, Beru, Siemens and many other makes.
ü TPMS valve sensor transmission check for where direct activation is not supported on the vehicle.
ü Pressure loss check for RF sensors.
ü ECU programming on a wide range of vehicle types (where TPMS is fitted) including: Renault, Peugeot, Citroen, Fiat, Alfa Romeo and many others
OmiTire Plus Kit can be updated in the future to cover new vehicle applications.
Automotive Equipment - in tune with the Future